IJTEEE
International Journal of Technology Enhancements and Emerging Engineering Research (ISSN 2347-4289)
PREVIOUS PUBLICATIONS



IJTEEE >> Volume 3 - Issue 8, August 2015 Edition



International Journal of Technology Enhancements and Emerging Engineering Research  
International Journal of Technology Enhancements and Emerging Engineering Research

Website: http://www.ijteee.org

ISSN 2347-4289



Power Quality Event Detection, Monitoring And Improvement: A Survey

[Full Text]

 

AUTHOR(S)

Megha Khatri

 

KEYWORDS

Keywords : Power Quality, Fourier Transform, Wavelets, Artificial Intelligence, Fuzzy Logic technique, Neural networks

 

ABSTRACT

ABSTRACT: Power Quality has become an important issue of discussion after a decade of inception of power system. The aim of electric power system is to generate electrical energy and to deliver this energy to the end user equipment at an acceptable Level. The power quality detection, monitoring and improvement methods are explained in this paper under various sections. This study will be providing insight to the importance of improved power at user end and also the scope of further implementation of discussed methods in field applications.

 

REFERENCES

[1] G. T. Heydt, O. M. Houx, P.J.Womeldor “An Assessment of Personnel Needs and Supply in Electric Power Engineering,” IEEE Transactions on Power Systems, Vol. 2, 1986.

[2] G. T. Heydt, “Electric Power Quality: A Tutorial Intro-duction,”IEEE Computer Applications in Power, 1998.

[3] Mladen Kezunovic, “A Novel Software Implimentation Concept for Power Quality Study,” IEEE Transactions On Power Delivery, Vol. 17, No. 2, April 2002.

[4] T. Lachman, A. P. Memon, T. R. Mohamad, Z. A. Memon, “Detection of Power Quality Disturbances Using Wavelet Transform Techniques,” International Journal for the Advancement of Science & Arts, Vol.1, No.1. ,2010.

[5] D. G. Lieberman, R. J. Romero-Troncoso,R.A.Osornio-Rios,A.Garcia-Perez,E.Cabal-Yepez” Techniques and methodologies for power quality analysis and disturbances clasifiction in Power Systems: A Review,” IET Generation, Transmission and Distribution, Vol.5, No.4, pp. 519-529, 2011.

[6] Surya Santoso, Jeff Lamoree, W. Mack Grady, Ed-ward J. Powers, Sidharth C. Bhatt, “A scalable power quality event identification system.,” IEEE Transactions on power delivery, Vol. 15, No. 2, 2000.

[7] R.C.Sermon, “An overview of power quality standards and guidelines from the end users point of view,” IEEE rural electric power conference, San Antonio, 2005.

[8] P. K. Dash, B. K. Panigarhi, G. Panda, “Power Quality analysis using S-Transform.,” IEEE Transactions on Power Delivery, Vol. 18, No. 2, 2003.

[9] L. Angrisani, P. Daponte, M. D’Apuzzo and A. Testa, “A Measurement Method Based On The Wavelet Transform For Power Quality Analysis,” IEEE Transactions on Power Delivery, Vol.13, No.4, 1998.

[10] Dogan Gokhan ,Omer Nezih Gerek “ Power Quality Event Detection using Joint 2D-Wavelet Subspaces,” IEEE Transactions On Instrument. And Measure, Vol.14, No.4, 1999.

[11] Surya Santaso, W. Mack Grady, and Edward J. Powers, “Characterization of Distribution Power Quality Events with Fourier and Wavelet Transforms,” IEEE Trans. on Power Delivery, Vol.15, No.1, 2000.

[12] L. Angrisani, P. Daponte, and M. D’Apuzo, “Wavelet network-based Detection and Classification of Transients,” IEEE Trans. Instrum. and Measure., vol. 50, Oct. 2001.

[13] C.H. Lin and C.H. Wang, “Adaptive Wavelet networks for Power Quality Detection and Discrimination in a Power System,” IEEE Trans. Power Delivery, vol. 21, no. 3, pp. 1106-1113, July 2006.

[14] S.R.Samantaray, “Decision tree-initialized Fuzzy rule-based Approach for Power Quality Events Classification,” IET Gener.Transm. Distrib, ,Vol.4, No.4, pp.538-551, 2010.

[15] M. Manjula, A.V. R. S. Sarma, “Assessment Of Power Quality Events by Empirical Mode Decomposition (EMD) based Neural Network,” Proce. of World Congress on Engineering, Lon-don, U.K. Vol.2, 2012.

[16] Maria J. Santofimia, Xavier del Toro, Pedro Roncero-Sanchez, Francisco Moya, Miguel A. Martinez, Juan C. Lopez, “ A Qualitative agent-based Approach to Power Quality Monitoring and Diagnosis,” Integrated Computer-Aided Engineering 17(2010) 305-319.

[17] K. Chan, “Technical and Performance aspects of a Dynamic Voltage Restorer,” IEEE Half Day Collo-quium, pp.501-525, 1998.

[18] S. V. Ravi kumar, and Sivanagaraju, “Power quality Improvement Using DSTATCOM and DVR,” Int. Journal of Elec. Power Eng., Vol. 1, No. 3, pp. 368 -376, 2008.

[19] Anaya, O., Acha, E., “Modeling and analysis of custom power systems,” IEEE Trans. Of Power Delivery, Vol. 17, pp.266-272, 2002.

[20] M. H. Haque, “Compensation of Distribution System Voltage Sag by DVR and DSTATCOM,” IEEE Power Tech. Proceedings, Vol.1, pp. 10-13, 2001.

[21] V. Khankikar , A. Chandra, A. O. Barry, T. D. Nguyen, “Steady State Power flow analysis of Unified Power Quality Conditioner (UPQC),” International conference on Industrial Electronics and control Applications, 2005.

[22] Ahmet Teke, Lutfu Saribulut, Mehmet Tumay “A Novel Reference Signal Generation Method for Power-Quality Improvement of Unified Power-Quality Conditioner,” IEEE Transactions on Power Delivery, Vol.26, No.4, pp.2205-2214.

[23] Moleykutty George, “Artificial Intelligence Based Three-Phase Unified Power Quality Conditioner,” Journal of Computer Science, Vol.3, No.7, pp.465-477, 2007.

[24] Hideaki Fujita and Hirofumi Akagi,” The Unified Power Quality Conditioner: the integration of series and shunt-active filters,” IEEE Transactions on Power Electronics, Vol.13, No.2, pp.315-322, 1998.

[25] Ambra Sannino and Jan Svensson,” Application of Converter-based series device for Voltage Sag Mitigation to induction motor load,” Electroencephalography and Clinical Neurophysi-ology/electromyography and Motor Control, 2001.

[26] C. Oscar, M. Hernández and P. N. Enjeti, “A Fast Detecting Algorithm Suitable For Mitigating Of Numerous Power Quality Disturbances,” IEEE Transaction on power Delivery” Vol.41, No.6, 2005.

[27] Enrique Perez and Julio Barros, “Application of Ad-vanced Digital Signal Processing tools for Analysis of Voltage Events in Power Systems,” International Journal of Electrical Engineering Education,Vol.46, No.3, pp.211-224.

[28] R. C. Sermon, “An overview of power quality stan-dards and guidelines from the end users point of view,” IEEE rural electric power conference, San Antonio, TX, May 08-10, 2005.

[29] Ambra Sannino and Jan Svensson,” Application of converter-based series device for voltage sag mitigation to induction motor load,” Electroencephalography and Clinical Neurophysiology/electromyography and Motor Control, 2001

[30] N.G. Hingorani, L.Gyugyi,., “Understanding FACTS: Concepts and Technology of Flexible AC Transmis-sion Systems,” IEEE Standard Publishers Distribu-tors Press, 2001.

[31] O. Poisson, P. Rioual, and M. Meunier, “New Signal Processing Tools Applied to Power Quality Analysis,” IEEE Transactions on Power Delivery, Vol. 14, No. 2, 1999.

[32] S. K. Pandy and L. Satish, “Multi-resolution Signal Decomposition: A new tool for Fault Detection in Power Transformers during Impulse Tests,” IEEE Transactions on Power Delivery, Vol.13, No.4, 1998.

[33] A.W. Galli, G. T. Heydt and P. F. Ribeiro, “Exploring the power of wavelet analysis,” IEEE Press Computer Applications in Power, Vol.9, No.4, 1996.

[34] L.W. Cheok, T. K. Saha, Z.Y. Dong, “Power Quality Investigation with Wavelet Techniques,” The University of Queensland, St. Lucia, QLD 4072 , Australia.

[35] P. Rajakumar, J. Shankar, R. Saravanakumar, S. B. Sabberwal, “Review on Power Quality Issues,” Inter-national Journal of Engineering Science and Technology,Vol.2, No.1, 2012.

[36] Z. Yong, C. Hao-Zhong, D. Yi-Feng, L.Gan-Yun, S.Yi-Bin, “S-Transform-based classification of Power Quality Disturbance Signals by Support Vector Machines,” Proceedings of the CSEE, pp. 51-56, 2005.

[37] T. X. Zhu, S. K.Tso, K. L. Lo, “Wavelet-Based Fuzzy Reasoning Approach to Power Quality Disturbance Recognition,” IEEE Transaction on Power Delivery,Vol.19, No.4, pp. 1928-1935, 2004.

[38] P. Rieder, J. Gotze and J. A. Nossek, “Multi-wavelet Transforms Based on Several Scaling Functions,” IEEE Transaction on power delivery, pp.393-396, 1994.

[39] G.T. Heydt and A.W. Galli, “Transient Power Quality Problems Analyzed using Wavelets,” IEEE Trans. Power Delivery, Vol. 12, No. 2, pp. 908-915, 1997.

[40] Math H.J. Bollen and Irene Y. H. Gu, “Signal Processing Of Power Quality Disturbances,” IEEE Press Series on power engineering.

[41] P.K.Dash, B.K.Panigarhi, G.Panda, “Power Quality analysis using S-Transform.,” IEEE Transactions on Power Delivery, Vol. 18, No. 2, 2003.

[42] N.S.D. Brito, B.A. Souza And F.A.C. Pires, “Daube-chies wavelets in Quality of Electrical Power,” IEEE Press, 1998.

[43] H. Zhang P. Liu and O.P. Malik “Detection and Cassification of Power Disturbances in noisy conditions,” IEEE Proc.-Gener. Transm. Distrib, Vol.150.No.5, 2003.

[44] E. Stvaktakis, M. H. J. Bollen, and I. Y. H. Gu, “Expert System for Classification and Analysis of Power System Events,” IEEE Trans. on Power Delivery, Vol.17, No. 2, pp. 423-428, 2002.

[45] Liang Cai, Hongkun Chen, “Fuzzy Studies On Power Quality-Part-II Monitoring and Management,” IEEE Press, 2002.

[46] Wael R Anis. Ibrahim, Medhat M. Marcos, “Artificial Intelligence and advanced Mathematical Tools for Power Quality Applications: A Survey,” IEEE Transactions on power delivery, Vol. 17, No.2, 2002.

[47] Surya Santoso, Edward J. Powers, Mack Grady, “Power Quality Disturbance Waveform Recognition Using Wavelet-Based Neural Classifier-Part-1 Theo-retical Foundation,”IEEE Transactions on Power delivery, Vol.15, 2000.

[48] C.H. Lin and C.H. Wang, “Adaptive Wavelet Networks for Power Quality Detection and Discrimination in a Power System,” IEEE Trans. Power Delivery, Vol. 21, No. 3, pp. 1106-1113, 2006.

[49] J. Vijayakula sooraya, G. A. Putrus, P. D. Minns, “Electric Power Quality Disturbance Classification using self Adapting Artificial Neural Networks,” IEEE Proceeding Generation, Transmission and Distribution, Vol. 149, No. 1, 2002.

[50] G.T.Heydt, “The Next Generation of Power Distribution Systems,”IEEE Transaction on Smart Grid, Vol. 1, No. 3, pp. 225-235, 2010.

[51] S.V Ravi Kumar, S. Siva Nagaraju, “Power quality Improvement Using D-STATCOM and DVR,” Int. Journal of Elec. Power Eng., Vol.1, No.3, pp. 368 -376, 2008.

[52] G.T. Heydt, A. Edris, “Impact of FACTS Controllers on transfer capability of Power Grids,”IEEE Power Engineering Society Winter Meeting, Vol.1, pp.556 – 561, 2002.

[53] S.V Ravi Kumar, S. Siva Nagaraju,”Simulation Of D-STATCOM and DVR in Power System,,” Asian Research Publishing Network, Vol.2, No.3 , 2007.

[54] Arulampalam, J. B. Ekanayake, N. Jenkins, “Application study of a STATCOM with Energy Storage, “IEEE Proc. -Gener. Transm. Distrib, Vol.3, pp. 373–384, 2003.

[55] K. Kobayashi, M. Goto, Y. Yokomizu, T. Matsumura, “Power System Stability Improvement by Energy Storage type STATCOM,” IEEE Proceedings of Power Tech. Conference, Italy, Vol.2, pp. 23–26, 2003.
[56] Adamczyk, R. Teodorescu, R. N. Mukerjee, P. Rodriguez, “Overview of FACTS Devices for Wind Power Plants Directly Connected to the Transmission Network,” IEEE International Proceedings of the Symposium on Industrial Electronics, Italy, pp. 3742–3748, 2010.

[57] M. Forghani and S. Afsharnia, “Online wavelet transform-based control strategy for UPQC control system,” IEEE Transactions on Power Delivery, Vol. 22, No. 1, pp. 481–491, 2007.

[58] J.A. Munoz, J. R. Espinoza, C. R. Baier, L. A. Moran, E. E. Espinosa, P. E. Melin and D. G. Sbarbaro, “Design of a Discrete-Time Linear Control Strategy for a Multicell UPQC,” IEEE Transaction on Industrial Electronics, Vol. 59, No. 10, pp. 3797- 3805, 2012.

[59] B. Singh, K. AI-Haddad and A. Chandra, "A Review of Active Power Filters for Power Quality Improvement,” IEEE Trans Ind. Electronics, Vol. 45, No.5, pp. 960-971, 1999.

[60] V. Khadkikar,A. Chandra, A.O. Barry and T. D. Nguyen, "Power Quality Enhancement utilising single-phase Unified Power Quality Conditioner: Digital Signal processor-based experimental validation," IET Power Electronics, Vol.4, No.3, pp.323-331, 2011.