IJTEEE
International Journal of Technology Enhancements and Emerging Engineering Research (ISSN 2347-4289)
PREVIOUS PUBLICATIONS



IJTEEE >> Volume 2 - Issue 8, August 2014 Edition



International Journal of Technology Enhancements and Emerging Engineering Research  
International Journal of Technology Enhancements and Emerging Engineering Research

Website: http://www.ijteee.org

ISSN 2347-4289



Effect Of Both Compression And Extension On The Electrical Resistivity Of NBR/EPDM Rubber Blend Filled With Different Types Of Carbon Black.

[Full Text]

 

AUTHOR(S)

H.N.M. Alsuhaiqi, A.A. El-Gamel, S.A. Khairy, H.H .Hassan

 

KEYWORDS

Keywords : EPDM; compression; NBR; resistivity; sensor.

 

ABSTRACT

ABSTRACT: Blend based on acrylonitrile butadiene rubber and ethylene propylene diene monomer rubber as 50NBR/50EPDM loaded with N-326(HAF) and N-774(SRF) carbon black fillers was prepared. The effect of each type of carbon black on the electrical resistivity of rubber blend was studied. The changes of the electrical resistivity of rubber blend during compression and extension were investigated. Based on the shell structure theory, the experimental results were explained from the view that external pressure induces the creation and annihilation of effective conductive paths, leading to the changes in the resistivity of blends.

 

REFERENCES

[1] T. M. Nair, M. G. Kumaran, and G Unnikrishnan 2004. J.Appl. Polym. Sci., 93: 2606.

[2] S.Wolff, M.J. Wang, E.H. Tan, 1994. Kautsch. Gummi Kunstst, 47: 780-798.

[3] S.Wolff, M.J. Wang, E..H. Tan, 1993. Rubber Chemistry and Tech-nology, 66: 163-177.

[4] G. Kraus, 1978. Rubber Chemistry and Technology, 51: 297-321.

[5] F. El-Tantawy, N. Dishovsky, 2004. Journal of Applied Polymer Science, 91: 2756-2770.

[6] L Krupa, I. Novak, I Chodak, 2004. Synthetic Metals, 145: 245–252.

[7] R. H. Norman, 1970. Conductive rubber and plastics. Elsevi-er,London.

[8] C. Cochrane, V. Koncar, M. Lewandowski, C. Dufour, 2007. Sen-sors, 7: 473–492.

[9] M. Shimojo, A.. Namiki, M. Ishikawa, R. Makino , K. Mabuchi, 2004. IEEE Sensors Journal, 4: 589–596.

[10] M. Inaba, Y. Hoshino, K.. Nagasaka, T. Ninomiya, S. Kagami, H. Inoue, 1996. ‘Proceedings of the IEEE/RSJ International Conffe-rence of Intelligent Robots and Systems, Dayton, USA’ Vol. 2: 450–457.

[11] K..P.Sau, T.K.Shaki, D. Khastgir, 1998. Composite Part A, 29:363.

[12] N. Hu, Y. Karube, C. Yan, Z. Masuda, and H. Fukunaga, 2008. Acta. Mater., 56: 2929.

[13] X.. Wang, and D.L.. Chung, 1998.Compos., 29B: 63.

[14] J. N. Aneli, G.E. Zaikov, and L..M. Khananashvili, 1999. J.Appl. Polym. Sci., 74: 601.

[15] X. S. Wen, Y. C. Xu, and X.S. Yi, 2004. National Defense Industry Press, Beijing.

[16] X. L. Tao, Y. Pan, and Q. Zheng, 2001. J.Appl. Polym. Sci., 79: 2258.

[17] A Voet, F.R. Cook, and A.K. Sircar, 1971 Rubber Chem. Technol., 44: 175.

[18] K. Sircar, A. Voet, and F.R. Cook, 1971. Rubber Chem. Technol., 44: 185.

[19] M. Blow, 1971. "Rubber Technology and Manufacture", Institute of Rubber Industry, London.

[20] N. Ando, M. Takeuchi, 1998. Thin Solid Films, 334: 182.

[21] L..H.Wang, T.H. Ding, and P. Wang, 2009. Carbon, 47: 3151.

[22] A M. Y. El-Lawindy, W.E.. Mahmoud, and H..H..Hassan, 2003. Egypt.. J. Sol., 26: 43