IJTEEE
International Journal of Technology Enhancements and Emerging Engineering Research (ISSN 2347-4289)
PREVIOUS PUBLICATIONS



IJTEEE >> Volume 2 - Issue 7, July 2014 Edition



International Journal of Technology Enhancements and Emerging Engineering Research  
International Journal of Technology Enhancements and Emerging Engineering Research

Website: http://www.ijteee.org

ISSN 2347-4289



Design, Analysis And Optimization Of Skid Base Frame

[Full Text]

 

AUTHOR(S)

Pandhare A. P., Chaskar S. T., Patil J. N., Jagtap A. S., Bangal P. M.

 

KEYWORDS

Keywords-Skid Base frame, CAD model, FEA loading, static analysis, weight optimization

 

ABSTRACT

ABSTRACT: Skid Base Frame is a structural assembly consisting of beams of various cross sections and dimensions. The base frame is subjected to gravitational loading of all the components mounted viz. Compressor, Air Receiver vessel etc. The frame discussed in this report was designed with conventional CAD design practices and then analyzed statically with FEA software. The acceleration loads considered during analysis phase resembled the actual loading cases. The analysis was carried out to determine the induced stresses and the deflections at various locations on proposed frame. The structure was optimized to reduce weight.

 

REFERENCES

[1]. “Analysis and testing of Skid Frame of Compressor”, Joshi A. M., Jadhav T. A.; International Journal of Applied Research and Studies (iJARS) ISSN: 2278-9480 Volume 2, Issue 9 (Sep - 2013)

[2]. “Design and Finite Element Analysis of Base Frame of Power Transmission Unit”; International Journal of Applied Research in Mechanical Engineering, 2361-6250, Vol-2, Iss-2, 2012

[3]. “Dimensions For Hot Rolled Steel Beam, Column, Channel And Angle Sections (Third Revision)”; Indian Standard Organization; November 1996

[4]. “Static and Dynamic Analysis of a 4.5 Ton Truck Chassis”; T. H. Fui, R. A. Rahman; Jurnal Mekanikal, December 2007, No. 24, 56-67

[5]. “Strength of Materials”; M. Ramarutham; Dhanpat Rai Publications; Edition 12; 2012

[6]. “Fundamentals of Finite Element Analysis”; David V. Hutton; McGraw Hill Publication; 2004